Tips and Tricks to Unclogging a Drain

Open blocking drain that is clogged can be a complicated and annoying job, especially if you don't know what you are doing. Although there are various kinds of chemical solutions that you can use to unplug the drain, they emit hard smoke that can damage your plumbing pipe when it is not used correctly. Here's a short guide to helping you with cleaning without using toxic products. You can hire the high tech outside drain unblocker services at

  • Identify the blockage

Before you start working, you must be sure that there is a blockage in your sewer. First, make sure the sink, shower, or toilet doesn't flow correctly. If that's the problem, then this might be the result of a blocked drain.

Before trying to unblock the sewer ensure that you wear protective clothing such as gloves and glasses to protect your skin and eyes from particles, dirt, or debris.

  • How to open a dome

The easiest and most direct way to unblock the sewer is to use the disposal bar. This cheap and effective tool can be purchased in most hardware stores. Make sure you wear gloves and glasses before continuing to unblock. Ready? Let's start.

Remove the cover – Lift the channel inspection cover using a screwdriver

Clean the obstruction – this is where the stem occurs. Use the plunger extension to expel blockages. Keep in mind that this process can take a few minutes to spin and rotate before you actually delete the obstruction

Keep plants from your sewer – Be sure to keep flowers and plants from the water channel to prevent dry leaves and debris fall and block them.

  • What to do if you can't unblock your own drainage

Although most waterways can be blocked by DIY's enthusiasm, there are cases when you may need professional help. For example, if you cannot remove drainage after several attempts, consider calling in the local channel cleaning service.